How to: Jailbreak iPhone 3G 2.2.1 - Windows PC QuickPWN Edition
Disclaimer - Neither TiPb nor I take any responsibility for any problems/issues/bricking/etc. that may occur while using this software to modify your iPhone. Please be aware of what you are doing.
A few days back we brought you a simple guide to jailbreak your iPhone with firmware 2.2.1 on your Mac. Well today we are showing some love for our Windows faithful.
This guide will show you how to jailbreak the iPhone 3g only, not the first generation iPhone. Some important notes before we begin: You must have iTunes 8 installed and you must be on firmware 2.2.1, if you are not, be sure to update via iTunes. Also make sure to go into the task manager and disable ANYTHING Apple or iTunes related.
Let's get started, after the jump!
1. Get the tools.
Once you are positive you are running the 2.2.1 on your iPhone 3G and have iTunes 8 installed it's time to get the tools you will need. Create a folder on your desktop named "Pwnage", then download the following files into that folder.
Once you have downloaded the above files you should unzip the QuickPwn zip file inside the Pwnage folder you just created.
2. Launch QuickPwn
This should be simple enough no? Launch QuickPwn from the folder you extracted it to on your desktop.
3. Connect your iPhone 3G
Connect your iPhone 3G via USB to your computer and click the blue arrow to continue.
4. Locate Firmware
Now we have to click the browse button to locate your iPhone 3G firmware.
5. Selecting the 2.2.1 firmware IPSW
Select the 2.2.1 firmware IPSW file from the Pwnage folder you created on your desktop then select the IPSW file and click the open button.
6. Firmware Verification
QuickPwn will now verify you have selected the correct firmware. After it is verified click the blue arrow to continue.
7. Customize your firmware
This step allows you select what you'd like installed on your iPhone. You have the ability to select Cydia, Installer, and replace boot logos. Once you have made your selections click the blue arrow to continue on. If you want a full jailbreaking experience, installing Cydia and Installer is highly recommended.
8. Verify connection
QuickPwn will noW verify that your iPhone 3G is still connected to your PC. Again click the blue arrow to continue your journey...
9. Potential Tricky Part - Pay Attention
Ok, this part seems to give some people issues, but I assure you it does work. QuickPwn will now put your iPhone 3G into recovery mode. When its in recovery mode you will be given directions to: Hold the Home button for 5 seconds, Hold the Home and Power buttons for 10 seconds, then release the Power button and continuing holding the Home button until your iPhone is in DFU mode.
10. Let the jailbreaking begin - no going back now!
QuickPwn will detect your phone is in DFU mode and proceed with the jailbreaking process.
11. You are officially jailbroken - Congrats!
Well that's it folks, it's time to start exploring this whole new world you have just opened. For answers to more of the questions you may have regarding jailbreaking please head on into our forums. There are always members of our community willing to help you out!
| Tweet |
|
|
← Previously
Week in Review for September 29, 2008Leave a Reply
Note: Comments must be civil, respectful, and on-topic. If a comment does not add to the conversation, if it contains spam advertising, or inappropriate language or content, it will be removed. Insulting the topic, author, staff, site, network, or other commenters will result in the comment being marked as spam and potential prevent future comments from appearing on the site. Do not post as a business or your comment will likely be confused with spam. Comments containing links may be held for moderation. Relax, enjoy, and share in the discussion.
Have been trying this out for a couple of days on Windows Vista (32-bit). Things seem to go well until step 10. It just sits there on the screen with "Uploading exploit bootloader..." and the iPhone screen is dark since the iPhone 3G seems to be totally powered off. I think the problem is in step 9 but followed that to the letter. Any suggetions? Thanks!
Took the plunge and just jailbroke my iPhone 3g with 2.1 firmware. I'm running Windows XP and iTunes 8. This tutorial worked like a charm. The only thing I had to do differently was I HAD to have iTunes running, as opposed to the disclaimer above that said "disable ANYTHING Apple or iTunes related." I also chose not to install the pineapple boot screen, but did install Cydia and Installer. Thanks a million!
Is there a comprehensive list of apps available for jailbroken iPhones?
Do I need WinZip installed on my computer to open QuickPWN? Is there a free download for WinZip?
@Gg If you have Win XP then Zip is built in to the file system. A good zip alternative is 7zip, it's free!! Check it out!!
REY: I saw your post on the apps you can install. i just finished jb my 3g. Where can I find the apps you mentioned on your post?
Rey Says:
October 1st, 2008 at 4:53 am
@wonder Webb, after jailbreaking, go to Cydia, find/install the app Bossprefs, then tap the button that says “fix user did permissions”. That should fix your open/close issues.
@Allan, you may have to redo the process. Or restore back to original firmware first then try again.
To answer a few questions ive noticed: -Jailbreaking allows you to install 3rd party apps los of which are free. -These apps include Cycorder(video camera), SwirlyMMS(MMS Picture messaging), Winterboard(full visual customization), Quickgold(quick application/contacts launching), PdaNet(Internet tethering), TouchCast(streaming video podcasts), Snapture(zoomable and more camera), Categories(I have 50 apps all on one page categorized), SSH, the list goes on and on. The added features you get are well worth it. -For those fresh jailbrekers, don’t use the Installer app, use the Cydia app to install apps. It’s much more stable. -New firmware means new QuickPwn will be needed. Customizations of 3rd party apps can be backed up via SSH if new firmware come out -You do not lose any contacts, music, calendars, etc. It gets restored back after.
hey everybody that was very great and easy thanks a lot dude i looked all over the internet i couldnt find an easier way than this thanks a lot
Absolutely idiot proof... I am an idiot and it worked like a charm... Thanks!!!
My iphone 2.1 is jailbroken. My question is why i cant run apps from apps store i downloaded. It opens but close after few seconds. Please advise.
hi i try the process as you listed when i am on the step to browse the firmware it not giving me option to browse but automatic it detect my I-phone firmware which is 2.1
But i still try, it seem work at the beginning and on my I-phone show hard drive picture and PC screen showing jaibreaking process but after a while it give error message “your device has connected in the wrong mode. This can be caused by incorrect following of the instruction. Or a faulty USB connection. Please try again”
I try with different USB cable still the same message. I am using windows XP pro with SP 2 Need help from GURU
please advise on item 109. Thanks
hi i try jailbreaking my iphone 3g and the last step on reboot how long dose it take to reboot it just stuck on the apple logo for a long time now over two hour
just installed this and it worked like a dream
The last step refuses to work for me after trying it 9 times. I give up
will this work for the iPod Touch 2G?
My iphone 2.1 is jailbroken. My question is why i cant run apps from apps store i downloaded. It opens but close after few seconds. Please teach me.
The last step seems faulty to me. Every time I press and hold the home and power buttons at the same time, my iphone turns off, and it refuses to continue with the pwning. I have an iPhone 3g and I have checked that I have all the required files, as well as the .net Framework update.
i need help in question 23 too pls my iphone stuck on the apple logo for more than 1day and when i try to restore by opening itunes it lock itunes as well........help?
I had my 3G iPhone jailbroken and installed some apps, including BossPrefs and QuickGold. Since I had these two, I hid both Cydia and BossPrefs, so that whenever I wanted to run any of them I would call QuickGold to start them up.
I had to restore my iPhone, and had it jailbroken again. It was completely restored from backup before that jailbreak procedure, and now Cydia doesn't appear on Springboard.
Any one knows how to fix that?
Thanks
Followed all the instructions, had no problems on 2.1 Just remember to kill Apple/Itunes crap first. Only thing that took me by suprise was Pwnage doesn;t wait for you... you need to be ready to press the buttons etc in step 9... maybe people are mis-timing that.
I did all of the downloading and everything worked fine except my calls. I can't dial any numbers and sometimes can't answer calls. Please help this is killin me
can i use this for my itouch?i just in brand new 3g and it works just fine it is idiot proof.thank you
The jailbreaking process went just as described. I did encounter some issues after the jailbreak, which may or may not be common. Launching all applications became slower by 3-4 seconds, which was no big deal. My iPhone would go into the re-arrange mode by itself 2-3x a day, which was also not a big deal. However, yesterday (about 20 or so days after the jailbreak), pushing the home button while the phone was "asleep" or on "standby" (screen is off) would not activiate the "slide to unlock" screen. The screen remained turned off. Trying to turn off the iPhone with the power button didn't work either. It was as if the iPhone had locked up. However, when I plugged the power cord into the iPhone, as I first thought that the battery had run out, the iPhone came alive showing that my battery was still 1/2 full, and the "slide to unlock" screen also came up. With the power cord still plugged into the iPhone, the "home button" was working again to bring me back to the "home screen." However, when the phone went back to the "sleep" mode, the "home button" stopped working again. I pulled the power cord, and when I reinserted it, I was able to wake up the phone. I repeated the process in letting the phone to go to "sleep" mode, and once again, the "home button" would not work and the phone seemed lock. So I finally restored my iPhone through iTunes, and now everything works again. Hopefully, if the iPhone getting locked up on the "sleep" mode is a common problem, the Jailbreak team will get it resolved. The other two problems I had were tolerable. But the iPhone locking up (assuming that it was because of the Jailbreak) makes Jailbreaking not worth the trouble.
this is for iphonehelp post put the iphone in duf mode again and plug in itune well holding the home button hit shift key and hold and clik on restore
error meassage cames: "your device has connected in a wrong mode..." what can I do?
thank spin it work i will try jailbreak my iphone agian after restore but hope it wont get stuck on the apple logo agian.
Great tool! Was jailbreak My iPhone in a 10 minutes. Everything go fine. Thank You guys
My iphone 2.1 is jailbroken. My question is why i cant run apps from apps store i downloaded. It opens but close after few seconds. Kindly teach me.
HI ,I am new to iphone 3g.Is there an easier way to download windows quickpwn 2.1 without using a torrent.I have a rather slow link with torrnt access disabled by our network administrators...
Can i re-jailbreak my phone once it alreay jailbroken so i can take the pineapple logo at startup of the iphone? Or do i have to do a restore and then jailbreak it again. And now do i not get the pineapple logo at start up
when new firmware updates come out.... Which they will. Can I find them here? If not I would live to be notified of jailbreak updates. As for the Jailbreak process... FANTASTIC. This phone went from a 10 of 10 to a 15 0f 10. Would like to see a fully interrogated picture text App. You no all in one. I get a text and the picture is there... Love the 3G ("G" for Golden)
THANK YOU SO VERY MUCH for your well done tutorial -- I was using another sites "how to" and was stuck on the second step and didn't know how it to "browse" for the firmware. Thank goodness I found this one and realized they omited the IPSW 2.1 firmware downloading, I was under the impression that because my phone was updated to 2.1 firmware already it should've shown up automatically in the second "browse" screen. This worked without a glitch, took less than 5 minutes. Thanks again!
Fantastic! Took less than 10 minues start to finish! Thank you so much!
Does the Jailbreak process work with the official unlocked Iphone 3g?
Same as pat on 117 questions I tried 3 times already but I have no cydia icons or applications icons. I followed all instructions but it is not working for me. Help please
Worked first time. fantastic
I finally took the plung. I was so frustrated with the restriction that AT&T and Apple have placed on the phone that I couldnt take it anymore. I WANT TO SEND PICS!
I jailbreak/unlock the phone but i cant make calls. Shows no service? I use a t mobile card and att card. What could be the issue?The wifi works tho. There were at times when I use one sim card and it works but when i change to another it wouldnt work and when i switch back to the other one that worked, it wouldn't work after the switch.
this thing ruined my phone .. i followed the instructions exactly like required .. the phone doesn't even load anymore it just shows the mac apple .. itunes doesnt even notice it anymore .. man can anyone help me? i even press the power and home button down and then i turn the phone on and it just keeps showing the apple .. i cant even get the chance to restore it through itunes ...
the pineapple app does not work keep telling me i need another app to work pls help
I get stuck at step 10 I don't get prompted to do those parts about putting into DFU mode, the itunes icon and usb cable just appear on my iphone everytime and i have to recover my iphone with itunes every time. HELPPPPPP!!! I have itunes 8 and i have downloaded all the correct files but it won't work, what do i do. My email is: alexkelly92@googlemail.com if anyone could help me i would owe them forever. Thanks a million if you can
I'm stuck on the stupid little pineapple logo screen and its vibrated a few times. -.- Damn.
Awesome step by step instructions with visuals!!!
Took a little bit of searching to find this page, but I would highly recommend it!
Thanks for the hard work. Dr. J
when i restore my iphone 3g to fireware 2.1 my iphone come up apple logo with usb connector and slide for emergency.please help me
If you are on ATT in the US does the jailbreak still work as intended?
Hello All..The above information..!! Its gr8.. U know wat ..two days back (11/15/2008).. I bought an unlocked Iphone..and with curiosity updated it using ITUNES.. lost evry thing...Only thing I had was a screen to make emergency calls...tried evry other thing on NET .. nothing worked but this..
There may be many.. who will be in the same situation in which I was about 2 hours before..
My Advice.. Try this ...Step by step.. It will make your IPHONE not only work but even make it better...
Hats of to all the people who have made this possible and that also for free...You are realy doing a gr8888 job..
Thnx agn guys...
@cheaufomsh .. Get in touch with me at nishant.saurabbh@gmail.com.. I will help you out..was in same situation as you are now.. But the above info.. bailed me out .. tc
its nishant.saurabh@gmail.com
2 Questions: 1. i haven't tried jail break before and this will be my first time on my phone, so is this QuickPwn for me? 2. What if there is some problem during the process, will the phone never recover again? Guys do reply, m bit worried
I jailbroke my iphone 2.1 firmware using QuickPwn. Everything worked great until the stage where the apple logo comes on. It didn't seem to progress beyond that. It took about 6 hours (I went to bed) before the phone was usable. During that time, it often rebooted itself and sometimes vibrated. So if you find yourself with the same situation, don't panic too much. Leave it and forget about it. It might be that the number of applications you have installed on your phone lengthen the jailbreak process. The other thing - this was my first time to jailbreak my iphone. Hope this helps some people.
dear friend i have a iphone 3g 16 gb my problem is that its bluetooth doest work properly it doesnt detect bluetooth devices so i cant send or receive songs photos or anything
HELP HELP!! my iphone wont restore in itunes (i have the current one)...it keeps saying error 9 and the help tips given from apple didnt help at all.....i hope someone out there has an answer...i cant place or receive ANYTHING!!! ARGH!
@Rajat .. follow the given steps carefully and u wont have any problems.. If you run into errors.. try again..It ran into errors 2 times...( all were my mistakes)...but 3rd time I succedded..And yes.. you can restore again yr I phone from Itunes.. if you want to revert back...
Cheers Nishant
i get stuck by step 6 it does recodgnise ipsw but it doesnt go further then that plzzz help
@Nishant thanks buddy that gave me the confidence. YIPPI, i just jail broke my iPhone 3G within 4 minutes flat. Thanks man for the help, it was my first time and did it with confidence. I just needed to install the .NET framework 2, that's it. Thank you everyone
I jailbreaked my iphone bt the apps store apps are not working. Please help.........
Just want to say Thanks for this tutorial. I managed to get mine done and working. I kept getting stuck on the apple logo after all appeared to go well. (firmware 2.1, itunes
Anyway, I restored to my back up and that was the problem. Once I restored as new it worked and I am reloading it now. I did this just to get the catagories so I hope it works.
All worked but the phone keeps resetting when I try and sync regular apps. I tired quite a few times and the last the logo was back. Now I have to restore again, so I give up. As much as I would like the extras, I do not want something so buggy/ Maybe I'll try again next week.
"# ISHAAN Says: November 19th, 2008 at 7:31 am
I jailbreaked my iphone bt the apps store apps are not working. Please help………"
ISHAAN
Maybe try restarting the phone,meaning poer it don and turn it back on. If all else fails just do a restore. If it does not recognize put phone back into DFU mode hold home and power until restart then just hold home it should go into restore mode.
My "W" is stuck, sorry, I meant power it down
i tried it like a maillion times it wont work i think something is wrong with my usb connection or something. i tried everything i keeps saying you deivce has connected in the wrong mode, this can be caused by the incorrect following of the instructions, or a faulty USB connection, please try again if u guys have any ideas to help me out please contact me at allenchen1993@gmail.com. thanks guys if u are willing to help. god bless u. cool now if you guys have the answer for my mis fortune please feel free to contact me as well thanks you.
I have the same issue as allen chen. Its really strange because I am no stranger to unlocking an iphone its always worked before, Any advice will be much appreciated
i have a question i got an iphone 8gb an i want to jail break it i found out it is not llegal but im kinda scard that my phone might glith i want to know the safest way to do some help=)
I just got a 3G iPhone 2.1 last week and able to Jailbreak the iPhone; However, I am looking high and low on how to install the SMS software the enable SMS message forwarding,cut and paste.
Would appreciate anyone can point me to the tight link or provide instruction how to do it.
Thanks, tcinzheng
I am taking the plunge tomorrow (jailbreak) with my new 3g iphone I have windows xp operating system I am unsure if I should get the latest .net framework. Is the latest 2.0 or 3.5? I would assume that 3.5 is the newest however I have read mention of updating to 2.0 can someone please help? Thanks
To add to the last reply, I have windows xp with service pack 2. Should I upgrade to service pack 3. The reason I have not already done so is because I heard that service pack 3 does not agree with shared files from the internet. Thanks again.
I have an iPhone 3g FW 2.1 and I have followed the process using QuickPwn but the process hangs when QuickPwn resets the iPhone to RecoveryMode - then it just sits there doing nothing. I have tried this over 20 times now over the past month with no success. Any help or suggestions would be greatly appreciated at this stage - before I lauch mu iPhone at the nearest wall
Thanks heaps in advance.
Thank you for the great instructions. I have been going back and forth on whether or not to do it, and now that I have... I love it! Thanks again!
Will it still work with FW 2.2?
I just tried to jailbreak my iphone I have recently downloaded apps for my iphone via bittorrent to prepare for the fun ahead, however I do not know how to install these apps. Should I have cidia etc. as an app on my iphone? I am unsure if the jailbreak worked, how can I tell?
I had to restore and somehow my iphone updated to 2.2 firmware. Am I fu%8ed for jailbreaking now? can Someone pls help? Thanks
Well I feel like an idiot. I get stuck on step 3! I have iphone 3G, Itunes 8, and firmware 2.1. I've downloaded pwnage and I run the program but it never recognizes my iphone when I plug it in. Does any one know how to troubleshoot this?
(macaronicaesar) The pwnage program isnt ready for 2.2 firmware yet. Have a look here,
http://blog.iphone-dev.org/post/60830674/sir-step-away-from-the-keyboard
i jz bought an iphone 3g 2days ago....and i donno there is such a big problem to upgrade through itune... i downgrade my iphone 3g from 2.2 to 2.1 , y my phone still show no service ?? can anybody tell me how to do??
i have brand new iphone 3G 8g, i did factory defult restore, now only thing i am seeing in screen is emergny call, I am using for T-mobile sevice, when i insert tmobile sim with turbo sim does not do anyting, it's asking me to insert valid sim card withou pin enter. DOn know what to do now. Thx for your help
I bought my unlock iphone from Australia and I'm living in Malaysia. If my phone is already unlocked, jailbreaking the phone, will it lock up the phone again? Thanks!
I jailbroke my iphone yesterday....I plugged it in to itunes then itunes downloaded a file and RESTORED EVERYTHING. Now my iphone is back to saying "connect to itunes....insert valid sim" same crap! I am tyring to download pwn, but my school computers are not letting me open them...saying it has an error...maybe the firewall is blocking it? My laptop is also not responding to the program. What should I do? Should I try it on another computer?
My Iphone is officially unlocked for 2.2 however, I need to know how to get apps, more importantly, games on my iphone can someone pls help? P.S. Bad Ash: You are great. I wish I could package you up and keep you in my back pocket for future reference. Apple or 3rd parties should come out with an app to access your brain. Thanks so much for everything on this site.
hi guys when my iphone was rebooting its taking forever .. and its not responding waht does this mean
Hi, i have an IPHONE 3G running on turbosim (originally AT&T) and now bahrain sim card is used. Can you please help me jailbreak this Iphone. Will the turbosim will work even after the jailbreak? I have 2.1 and would like to keep same firmware. I heard people who upgraded to 2.2 and turbosim didnt work. Can you please help me jailbreak my 2.1 IPHONE 3G. I only have a Windows Vista and waht tool i need for jailbreak? I have some questions:
1) Shall i remove the turbosim and chip before the jailbreak? 2) after jailbreak, i can put turbosim and will it work? 3) i heard i need to activare in jailbreak, where can i find this and wah is this for? 4) what firmware I need to use -can you give me the link?
thanks, chris
Hi,
i got AT&T orginal 3G Iphone from USA version 2.1 and got unlocked in india, at present i am using my local carrier sim card with turbo sim but some how i am not able to connect my phone with itunes..it shows sim card not compatible..currently using itunes 8 version, do i have to use different itune version?? can you please suggest me as i have always remove my sim card to connect to itunes.. 2. my phone icon seems to be showing problem as when i click on it for keypad page, it comes to home screen after 3 seconds and within that time period all functions are disabled in phone icon..what should i do??
If after the jailbreak you can't make dial calls because the phone dialer freezes and goes back to the main menu, try this:
1- Uninstall Kate from Installer: this is what everyone recommends, seems to work for a lot of people but didn't work for me.
2- Then go to Installer again and uninstall these apps:
A) Mobile enhancer B) RIP DEV preferences
3- Reboot your iPhone.
That's what I did and got my dial pad back again.
Hope this helps someone, I spent like three hours searching for a solution...
I got this error at step 9: "Your device has connected in the wrong mode. This can be caused by incorrect following of the instruction. Or a faulty USB connection. Please try again"
I have a jailbreaked iPod Touch 32Gb 1st gen fw 2.1, i just updated it to 2.2 from iTunes and tried to pwn it with Quickpwn 2.2, but at the step 9 i got that error.
It's strange cuz i've done this many times with with fw 2.0 and 2.1 with no errors, but now i can't do it with 2.2
I read all posts and found that allen chen, Christopher V, Dustin Kavanagh, Mike, Noli and me have the same problem.
Any advice email me: mark_mm2000@yahoo.com
@Spartan7: I haven't been following this thread so sorry for the late reply. You've probably already figured this out but all the apps I mentioned come from Cydia
i tried the jail breaking thing and it worked the whole way untill it got to the logo of the pinnaple thing and it didnt move fore like 2 hours so i did it again and still the same thing happened plz helpp!! i have v2.0!!
just upgraded my 2g iphone to 2.0, now i need to jailbreak it again. can anyone tell me would i lose all my messages and notes if i do it again?
thanx
Answer to posts 6 & 7, I did this about a week ago, worked a treat I upgraded to itunes 8 2.2 did the jailbreak, worked just fine, as it should, but then I went and did something very stupid, and tried to load ziphone onto it, it braught up a silly looking cartoon man with some Russian word in a bubble, and would not progress from there, did a restore still could not get ziphone 3.0 to work, so I will be using the method asked about in posts 6 & 7, I wanted to try ziphone so I could install an app I got to my iphone, I run Windows xp and have no clue how to get the app folder from my desk top to my iphone, it was a free app, pretty nifty little thing, but cant get it onto my iphone from the pc, any tips would be greatly appreciated
hey guys I unlocked my 2.1 firmware iphone 1st gen and after all of that, the signal bar is completely depleted and i cant open Cydia, Installer, Safari, or make calls. And my tmobile logo wont appear. how do i get it working again? Please reply asap.
Hey I have the 2.2 Firmware. How can I get this off my phone and install the 2.1 Firmware. And to everyone else. My buddy has the 2.1 Firmware. It downloaded NO PROBLEM. and EVERYTHING is absolutely awesome. He was downloading apps for hours. Nothing has gone wrong. Thanks to this site.
I did it !!! After a week of trying evertything!!
I have a jailbraked iPod touch 1st gen, 2.2 firmware working 100% I used QuickPwn 2.2
How to solve the ERROR (post 183): “Your device has connected in the wrong mode. This can be caused by incorrect following of the instruction. Or a faulty USB connection. Please try again”
SOLUTION: It is pretty easy, i wasn't pressing the HOME button enough. What worked for me is to press the HOME button with the NAIL, and VOILA it worked !!!
To all those newbies i advice you to press the HOME button with your nail in step 9. Pretty easy solution but nobody told me how to solve it!
well ... took the plunge and it made a good bit of kit a superb device .... I had the problem with the phone app not working buy "Koas post #182" cured that in 5 mins ...
Anyone recommend a landscape text app ? then life is complete.
KC
I have just done my iphone i was a little bit scared to mess about with it at first but it really is simple to do and now i can do so much more with my iphone great stuff thanks...
i got an error
@Koas Mobile Enhancer was the only app installed of the 3 u mentioned. Uninstalled it and got my dialpad back! Thanks alot!
i jailbroke yesterday folling these steps and everything worked just fine... untill i found out my phone wont make ANY CALLS it texts, goes on the internet and everything! but when i click on the green phone symbol to make a call it just freezes and goes to the home page!!! what should i do!!! the phones kinda useless without being able to make or recieve calls.....
my phone have a phone symbol. when you press so no come out green symbol there is not come out phone symbol when you press go automatic go to orginal screen
Hi Nishant
I have just jailbroken a 1g firmware 2.1 but cannot use any SIM on it. It says invalid SIM though it allows me to receive and make calls from the Emergency Pad but somehow I cannot load the applications.I think it is only jailbroken and not unlocked..how do I do it ? Thanks brother.:)
Just like to thank Koas for post 182... Well played m8....:)
continuing #195... i restored it and jailbroke it again and then the same problem happened, at first everything worked, then there was an error. then the same thing happened where i cant make calls! is there any way to fix/prevent that?!
how to connect jailbreak iphone 3g with itunes