The Incipio DRX case for iPhone 4 is, in my opinion, one of Incipio's best cases to date -- and they've made some very good cases. Everything from the way it feels in your hand to how it adds virtually no bulk to your iPhone makes it a great investment. It also offers decent protection as well.

Click through for a complete review and some pictures!

The first thing you always notice when putting on a new case is how it feels in your hand. This case feels great. The material is slick but not slick enough that your phone is going to go flying out of your hand. It's also extremely easy to put on and take off. I've had it on for a little over a week and it doesn't seem to stretch out or lose its shape either.

Your buttons are all covered which means no dirt or dust can get in there. Covered buttons normally mean they are harder to press. That's not the case with the DRX. The buttons are just as easy to push as they are when there is no case on the device. The case also produces a click feedback when pushing the buttons, which is nice.

The case comes all the way around and over the top of the antenna band which means you can set your phone face down for privacy and not have to worry about whether or not your iPhone screen is going to get scratched. The dock connector, headphone jack, and vibrate switch are easily accessible as well. I haven't had any issues with any chargers, official or third party. They all fit perfectly. So do my Bose headphones.

The DRX provides a pretty substantial level of protection as well. It'll protect you from moderate drops. If you plan on throwing your iPhone into a wall, I can't promise any case would protect it except an Otterbox. Overall, if you are somewhat careful with your iPhone and just want a case that'll protect you from moderate accidental drops, this case is perfect. You can find the Incipio DRX case in the TiPb accessory store. If you use this case or something else, let us know in the comments!

Pros

• Easy access to all ports and buttons
• Slim design means no added bulk
• The material is somewhat slick, slide it in your pocket and pull it back out just as easily (sans all that pocket lint!)
• Easy to take on and off without the case losing its shape over time
• The case curves around the screen edge, so setting your iPhone face down is a non-issue

Cons

• Not meant for heavy duty protection. Moderate, yes. But don't throw your iPhone into a wall and expect it to come out unscathed
• Dust can sometimes accumulate around the edges of the screen by the corners of the case

The Belkin headphone splitter adapter is a great accessory to have on hand for long trips or nights at the coffee house. Its purpose is simple. It allows two people to plug their own headphones into the same device. This is great for a long flight where you and another person may want to watch the same movie on an iPad or iPhone.

Click through for a quick review, pics, and a video!

Headphone splitters are a relatively cheap way to share media with someone else from one device. I've always found headphone splitters extremely useful on long car rides or flights. Two people can watch the same movie or listen to the same music off one device. This was always great when I was traveling with a friend who didn't have an iPad or iPhone.

Overall, I didn't notice any sound quality reduction from using the splitter with the iPad or iPhone. I tried with just regular headphones and then with 2 pairs of headphones plugged into the splitter. This is an extremely cheap accessory that's easy to place in a travel bag and forget about. It's there when you need it. They are available in both black and white.

You can pick one up from the Belkin headphone splitter adapter from the TiPb accessory store for $4.95 right now (that's 75% off).

Pros

• Easy to use and connect
• Small so it's easily stowed away in any bag or purse
• Standard headphone jack size allows for virtually any headphones to be used

Cons

• If you use an Apple bumper on your iPhone 4, the adapter won't fit. You'll have to remove the bumper
• As the main connection is somewhat wide, you may have issues fitting it in the headphone jack with certain cases.

The Incipio NGP Matte Case is made from semi-rigid next generation polymer (NGP) that is tear and elongation resistant. Even though the case is rather thin, there's no denying its durability. It also provides necessary friction to keep the iPad from sliding from your lap while still feeling soft to the touch. Although the Incipio NGP Matte Case is tear resistant, it is not scratch resistant. I have only used this case while at home, yet the back has obtained some prominent scratch marks.

This skin allows easy access to all ports and buttons. To provide some additional protection, the case covers the volume and power buttons, however,the material is molded to fit over the buttons perfectly, so it is still very easy to use them.

The Incipio NGP Matte Case is available in five stylish colors: black, confetti, sage, gunmetal, and cerulean and is available in the TiPb iPad Accessory Store. If you're looking for a good durable skin case, be sure to check this one out!

Pros

• Tear and elongation resistant
• Thin, yet durable
• Covers volume and power buttons for extra protection
• Includes screen protector and cleaning cloth
• Available in 5 colors

Cons

• Scratches easily

The SPE sync cable for iPhone and iPad is a perfect and affordable solution for the age old problem of never having enough cables handy when you need them. If you've ever experienced the frustration of getting to the office and finding your iPhone at only 50% battery life and realizing that you forgot your sync cable... well this accessory is for you.

At only $4.95, the SPE sync cable is nearly a quarter of the price of Apple's cable. So if you've been thinking it'd be nice to have an extra cable or two laying around, pick one of these up!

In comparison with Apple's cable, SPE's sync cable is the same length at 3 feet, 4 inches long. However, the dock connector end is bigger. This means that it may not work with all cases. If you use a case that is designed in such a way that Apple's sync cable barely fits, then the SPE cable will not work for you. Two cases that I have encountered that do not work with this cable is Apple's bumper case and Element's Vapor case. Another difference is that SPE's cable has two buttons you must squeeze in order to unplug it from your device. If you like a secure connection that won't come loose unintentionally, you'll like this. If you prefer the convenience of of quick and easy removal than this is mildly annoying, but acceptable.

Despite these inconveniences, the SPE sync cable for iPhone and iPad is an excellent choice for a back-up cable and for that the price is its biggest draw.

The SPE sync cable for iPhone and iPad is available from the TiPb iPhone + iPad accessory store.

Pros

• Great cable for iPhone, iPad, and iPod
• Affordable

Cons

• Will not fit all cases
• Must squeeze buttons to unplug

The iLuv Skin Case is definitely an extremely thin case. It is made of a soft rubber silicon material that feels extremely smooth to the touch. Some people may be willing to sacrifice a little bit of protection to have a thinner more portable case but in my opinion, this case was more than a little too thin.

If you want something extremely thin and don't plan on transporting your iPad very far in this case, you should be okay. Other than that, this case is more for looks than anything else.

I wouldn't say it's durable by any means. And after taking the case off and putting it back on a few times, the material starts to lose its shape. This is the sacrifice you'll make by using a case as thin as the iLuv skin case. In my honest opinion, I'd probably step up to a case that is a little thicker. Sure it may cost you a few more dollars but you'll be buying another one of these pretty quickly since it'll lose its shape. I'd even go as far as to say if you snag it on something, it will tear very easily.

iLuv makes several other great cases that don't sacrifice protection when it comes to making a sleek case. I'm not quite sure why they compromised so much on this one.

The iLuv Skin Case is available in the TiPb iPad Accessory Store as well as several other cases. If you already have this case, let us know what you thought of it in the comments.

Pros

• Extremely thin and adds virtually no bulk

Cons

• While it may be thin, it adds next to no protection
• Material feels cheaply made and very flimsy
• No grip means your iPad may be more likely to slip out of your hands

The Griffin Wave for iPhone 3G uses a unique wave lock design to create a snug fit for the iPhone and offer solid protection. The hard plastic case was unique among competitor’s offerings because instead of choosing a slide mechanism to connect the case together, it uses a front piece and a back piece to hold the iPhone. Does the Griffin Wave succeed as a case? We think so. Read on to see why.

Read on for the rest of the review!

Design

The Griffin Wave for iPhone 3G is a hard plastic case that offers protection for the chrome rim, corners, and entire back of the iPhone. It comes in four color choices and allows accessibility to all the ports, switches, buttons and jacks on the iPhone.

As mentioned before, the Wave case comes in two parts. Unlike other cases which offer a top and bottom slide mechanism, the Griffin Wave opts to use a front piece and a back piece—held together via the interlocking wave design. To explain it briefly, the wave shaped closure overlap and inserts into each other to create a very, very snug and secure fit. It kind of looks like DNA.

The polycarbonate of the Griffin Wave is clear and the wave lock design is very pleasing to the eye. The helix design adds a certain amount of depth and improves the look of the iPhone 3G.  

Usability

I found that the material used in the Griffin Wave feels great in the hand. Though it is unmistakably a hard plastic case, there is a soft touch rubber feel to it and the iPhone feels safe inside. I believe that Griffin found a great compromise with soft cases and hard cases in the Wave. Whereas soft cases offer better grip, it often loosens over time. The benefit of a hard case is that it soundly protects the iPhone without wear and tear. But the main problem is it typically adds too much thickness and that the material doesn’t provide for much grip.

In the Wave's case, it combines both the sturdiness of a hard case with the tactile feel of a soft case. I loved the added depth and dimension of the material and found it very pleasing to hold. Also the clear polycarbonate material allows you to see the Apple logo on the iPhone and gives off a better look than an all plastic material would.

All the ports and switches of the iPhone are made available with the Wave case. The hole for the camera is exact. Because of such precise cuts along the ports and openings, it leaves little room for dust to settle and build up. Though it does add some amount of thickness, I didn’t find it to be bothersome.

However, the case doesn’t seem to match up exactly where the front portion and the back portion meet. This is odd considering everything else about the Wave is so exact and beautiful. Though the slight opening might only affect the most nit picky of people, it is a design flaw nonetheless. The packaged plastic screen protector is a throwaway, it diminishes the iPhone’s sensitivity and is difficult to use. Spring for a adhesive screen.

Final Thoughts

The Griffin Wave for iPhone 3G is a subtly styled, great feeling case. Griffin really did a good job with the Wave and its unique locking system not only offers a secure fit but also adds to the design. I think if you were looking for a hard case for the iPhone 3G, you couldn’t do much better in regards to look, feel, and all around security than the Griffin Wave.  

PROS

• Unique closure system
• Great Design
• Adds minimal thickness
• All ports are accessible

CONS

• Back and Front portions don't meet up exactly
• Packaged Plastic Screen Protector is a throwaway

FINAL RATING: