How to: Jailbreak/Unlock Your 1st Generation iPhone 2.2.1 - Windows PC QuickPWN Edition

Disclaimer - Neither TiPb nor I take any responsibility for any problems/issues/bricking/etc. that may occur while using this software to modify your iPhone. Please be aware of what you are doing.

It was not long ago that we filled you in on the steps to take in order to jailbreak your iPhone 3G on Mac OS X as well as a Windows PC. Well today TiPb is proud to present a step by step guide to not only jailbreak your first generation iPhone 2G but to unlock it while jailbreaking. This is for Windows PC's only.

So if you are against AT&T in the US, or simply need to run your original iPhone on an international carrier like Rogers in Canada or any GSM/EDGE network around the world, then please read on after the jump!

This guide will show you how to jailbreak/unlock the original iPhone 2G only, not the iPhone 3G. Some important notes before we begin: You must have iTunes 8 installed and you must be on firmware 2.2.1, if you are not, be sure to update via iTunes. Also make sure to go into the task manager and disable ANYTHING Apple or iTunes related.

1. Get the tools.

Once you are positive you are running the 2.2.1 on your iPhone and have iTunes 8 installed it’s time to get the tools you will need. Create a folder on your desktop named “Pwnage”, then download the following files into that folder:

Unzip the QuickPwn.zip file inside the Pwnage folder.

2. Launch QuickPwn

Simply click on the pineapple from the Pwnage folder you created on your desktop.

3. Connect your iPhone

Connect your iPhone via USB to your computer and click the blue arrow to continue.

4. Locate Firmware

Now we have to click the browse button to locate your iPhone firmware.

5. Selecting the 2.2.1 firmware IPSW

Select the 2.1 firmware IPSW file from the Pwnage folder you created on your desktop then select the IPSW file and click the open button.

6. Firmware Verification

QuickPwn will now verify you have selected the correct firmware. After it is verified click the blue arrow to continue.

7. Customize your firmware

This step allows you select what you’d like installed on your iPhone. You have the ability to select Cydia, Installer, replace boot logos, and unlock your device. Once you have made your selections click the blue arrow to continue on. If you want a full jailbreaking experience, installing Cydia and Installer is highly recommended.

8. Bootloader Files

You will now be prompted to select your bootloader files that I instructed you to download a few minutes ago. Click on the Browse button and select the 3.9 bootloader from the Pwnage folder you created on your desktop. Repeat this for the 4.6 bootloader file. Then click the blue arrow button to proceed.

9. Verify Connection

QuickPwn will noW verify that your iPhone is still connected to your PC. Again click the blue arrow to carry on forward.

10. Potential Tricky Part - Pay Attention

Ok, this part seems to give some people issues, but I assure you it does work. QuickPwn will now put your iPhone into recovery mode. When its in recovery mode you will be given directions to: Hold the Home button for 5 seconds, Hold the Home and Power buttons for 10 seconds, then release the Power button and continuing holding the Home button until your iPhone is in DFU mode.

11. Let the jailingbreaking begin - no going back now!

QuickPwn will detect your phone is in DFU mode and proceed with the jailbreaking process.

12. You are officially jailbroken - Congrats! Now Time to Unlock - Be Patient

Once jailbreaking is complete, QuickPwn will then reboot it and run BootNeuter. Let BootNeuter take over, do not interupt it. This process will take about 5 minutes. Your iPhone will reboot when it has completed and you will have a fully unlocked iPhone!

13. Setting up data connection - T-Mobile ONLY

Go into Settings, General, then Network and enter the following information.

APN: wap.voicestream.com

Username: (leave empty)

Password: (leave empty)

For other Mobile Carriers data settings check out this link.

Well that’s it folks, it’s time to start exploring this whole new world you have just opened. For answers to more of the questions you may have regarding jailbreaking please head on into our forums. There are always members of our community willing to help you out!

Jeremy

Community editor. Tech enthusiast. All-around geek.

More Posts

 

0
loading...
7
loading...
1
loading...
0
loading...

← Previously

iPhone App Avalanche 12: SpaceTime Converter, iSign, Elements: Flash Cards and aDriverTest!

Next up →

Thurrott'ling iPhone Market Share: Paul Retorts!

Reader comments

How to: Jailbreak/Unlock Your 1st Generation iPhone 2.2.1 - Windows PC QuickPWN Edition

454 Comments

Hi, this works for the 3G too, just not the SIM unlock yet, i guess those money grabbers over at iphoneunlockuk.com are finally out of business for trying to sell freely available tools :-) please continue with your quest for world liberation from greedy theives!

When I did this and installed a Tmobile sim card it stayed at the make an emergency call screen! This it said wrong sim! But here's the thing, I could make and recieve calls but only from they emergency screen. Someone help please!

Do I need to unlock it or can I just Jailbreak it..?? I currently have ATT, and just want the installer...

WOW, Thanks alot this helped out alot everything worked just as you put it. Thanks again!!!!

I had the same issue as tewest86. I must have restored back to 2.1 native in iTunes and tried this two dozen times. I have an EDGE 8G iPhone, and haven't had this work yet. Is there another Windows unlock tool for 2.1, or should I try to roll back to 2.0.2?

When I did this and installed a At&t sim card it stayed at the make an emergency call screen! This it said wrong sim! But here’s the thing, I could make and recieve calls but only from they emergency screen. Someone help please!

You need to restore your iPhone to factory first before you use QuickPwn.
Insert the sim from the provider you WISH to use first.
Clear down the folder where your iTunes restore files are Should be “C:\Documents and Settings\%username%\Application Data\Apple Computer\iTunes\iPhone Software Updates” (where %username% is your PC’s profile name)
Open iTunes with the iPhone connected and hold down the ‘home’ button. iTunes should recognise an iPone is connecting in ‘restore mode’. iTunes will now download and install the latest 2.1 firmware. Let it complete this but when it is finished do nothing more than close iTunes. DO NOT ACTIVATE THE PHONE just close iTunes.
Now run QuickPwn select the newly downloaded firmware that iTunes just installed from the folder above, click on and tick all the required boxes, choose the boot file paths and click on, go through all the steps and once the phone reboots you will be active with no prompt to activate! Happy Dayzz
The crutial part is the iPhone firmware must never have been activated via iTunes in the first place otherwise it will always fail when you change SIM cards.
Hope this helps ricardo.

Unbelievable !!! It works perfectly !!!
1) Nice screens
2) Easy, very easy
3) Just follow the instructions
Put pay pall link here! I'm gonna pay for this !!!
THANKS !!!!!!!!!!!!!!!!!!!!!!!!!

What about activation. I dont have a contract with ATT so I need to activate it also.. Can you help me with that.. Thanks

I need help. When i get to quickpwn and click the blue arrow it says unhandled exception has occured in your application. I still click continue and nothing happens. What do i do?

Just picked up a 1st gen off craigslist yesterday and jail-broke and unlocked it. Worked great. Thanks for the instructions.

after i jailbreak and went thru all the phases, my iphone 2.1 - could not reconized my T-MOBILE sim card , I try to do with the ATT and after with the T-mobile but keeps saying different sim card please connect to itunes; and when I connected the iphone to the computer(windows) keeps saying: the sim card inserted on this iphone does not appear to be supported(t-mobile sim card) . WHAT SHOULD I DO ??? i try to do the unlock first with the att and after w the t-mobile but doesn't seems to wortk ??? NEED HELP PLEASE !

The unlock and jailbreak worked great, thank you, but I am having trouble getting it to recognize the EDGE data service. I put wap.voicestream.com into the APN line as instructed, but no dice. Anyone have any suggestions? Thanks.

APN has been change to T-MOBILE customers, the new one is : internet2.voicestream.com
thank you to all :-)

Weird, My first gen phone was already jailbroken and unlocked at version 2.0 I upgraded to iTunes default 2.1 before proceeding with the tutorial and the phone is only missing my Cydia/Cydia Apps (Not Jailbroken) but it is still unlocked and Im ready to make calls and didnt loose any other settings. Just an FYI for those who are in my same config and the jailbreak isnt important to you. (-:

Which power button is supposed to be held? The iPhone or my laptop? My computer just shuts down after 5secs.

hey guys it unlocked it and the top left sYS T-MOBILE WITH ME BARS butit says different sim detected and and it will only let me make emergency calls but i can call any number and recive calls did the jail break not work or what do i do plz help!

ok i really need help, the sim works but the phone is still locked like i cant enter the phone past the emergency olny screen its my only phone can some one please help- greatly aprectiated! thank you

Tried (and retried) all steps as published. I had previously 1.1.3 and upgraded it to 2.1 via itunes. After completing the jailbreak and unlock I get the emergency screen... am I missing something, appreciate if someone could respond.

very very very good its piss to do and works thank you so much let me buy you a drink!

I wonder when somebody will figure the emergencie problem out. Ive try to unlock my iphone so many times, and never works, I can see the tmobile sign in the up left, make and receive calls but, thats all.
If somebody can help, we might need before 10/29 cuz Apple is gonna have a new version on this date!!
Thanks a lot folks!

My iPhone stuck where Quick pwn asking to hold for 5 sec 10sec & 30 sec
I have tried it 10 times but its not working for me any help will be appriciated

I had this problem before, I was not following the instruction properly. You have to follow it carefully. (I used the MAC version). Ready means "do not touch the buttons yet"

do you know of a software that will enable youtube and safari to work after you have jailbroken and unlocked the iPhone?

Thanks a ton. I was about to throw my I phone. After updating and jailbreaking as per ur guidelines everything is fine. My syncing problems too sorted out.If you guys are coming to dubai please send me a mail for a party. Once again thank you for your unconditional & unselfish help

Thanks a million times dude .... ur the Best.... plz recomend more stuffs to make iphone better....:) ...

hey guys,
People having problem with TMOBILE check this link and do the last step with AT&T sim card. then switch to TMOBILE sim and do the above steps. This solved my issue :D

went the various steps and things worked as expected. I started having a problem however. The phone would freeze and reboot again and again. Whenever I try downloading and application or calling someone, the phone would reboot. Please help with this problem?

I jailbroke my iphone 2G, first I did it without the T-mobile sim card in place and then with the sim card in, but it still gives me the same error, "Different sim detected, Please connect to iTunes", When I connect to itunes, it says, "The sim card is not supported", I can receive and make phone calls. Does anyone know how this could be solved??

I had already tried 3 other methods I found on the internet and my son's friend (who's supposed to be an iphone guru) tried it too with no success. I did exactly as you said to do and followed all your directions and it was a total success!!! Thank you guys so much!!! I installed a T-mobile sim card works great!!!

i have a problem after the 7th step. it sais that there is a problem with the application... do you have any idea what am i doing wrong?

So, do you put the SIM card you want into your iPhone before you do this? after? in between? not matter?

I have tryed to do this over and over again but it is stuck on the emergency call screen. I have AT&T but can not get the iphone plan. I just dont have the internet. It will make calls from the emergency screen. Someone please help!

I myself have the iPhone 3G I used winpen2.5, noticed it only jailbroke my phone how do I go about unlocking it also and when do I have to insert the tmobile sim card before or after I start using quickpwn? And where can I get the little needle tool to pop out the apple/AT&T simcard??? Thank you

DUDE.. if we do this to get the 2.1, can we call and also have itunes apps at the same time? CUZ INSTALLER APPS SUCKS!!! please tell me

WOW! i have tried MANY(!) other attempts to jailbreak with other things and other versions of quickpwn. i even followed videos of people on youtube and NONE worked. THANKS!!!!!!!

oh.... i typed that when it was just turning back on, and now it is stuck at the pineapple. What is wrong?

i did jailbreak now how i can use my sim in iphone 3g... b'coz its showning no sim or no service.... can anyone help out to sort out this problem.... i need to unlock iphoen 3g to make call

I'm havin the same problem as JOSH it keeps sayin unhandled exception and i've restored my iPhone...PLEASE HELP ME I NEED THIS PHONE UNLOCKED!!!!1

damn guys im really pissed off !!! i tried this methods almost over 4 times and not only with this method but with many others that i found in the internet and none seems to work !!!!! im really pissed offff i want to unlock my iphone but damn there's simply no way !! i have the 2.1 ,,, after the prosedures it gets locked at the emergency screen!!!

does anyone know if the t-zones plan for T-mobile is just as good as the 20 dollar plan? Can I still get my email with it?
Also I found that first restoring the phone on Itunes and then using that image to pwn it worked after using the file here did not.
Rock on
Tom

I have to re-unlock and re-jailbreak phone.. will this work even if it was already jailbroke/unlocked? I am already on 2.1 firmware..just want to make sure this is the correct tool.. I bought my phone already unlocked etc. my data is showing up as all orange and itunes says it cannot read my phone anymore.. so wanted to check before I do a restore ..thanks

this step by step tutorial worked perfectly. great screen shots guys and so easy to understand. everything works.. calls, features AND tzones. thanks again!

One question, does the EDGE service from tmobile work free? or do I have to pay the 5.99 plan?

When I did this and installed a Tmobile sim card it stayed at the make an emergency call screen! This it said wrong sim! But here’s the thing, I could make and recieve calls but only from they emergency screen. Someone help please!

I unlock my phone thanks! But I have a problem, it wont let me go onine, cant use youtube, no itunes, no maps, im using a T-mobile sim card.. Am I doing somrthing wrong here? How can I get Wifi turn on?

This was attempted on 5.11.2008
Hi I was using ziphone with 1.1.4 firmware and wanted to use Quickpwn 2.1. I restored my Iphone from I tunes by clicking and holding SHIFT then hitting restore in I tunes and after it rebooted it asked me to insert original sim-card. I inserted my pay as you go O2 sim-card, which it was happy with. I went to upgrade to 2.1.1 firmware but it asked me to upgrade to the latest I tunes. After updating I tunes I then uploaded the firmware 2.1.1 I then followed the procedures exactly as explained from QuickPwn, everything worked fine. It came to the end which also unlocked the phone but when putting in the unofficial sim-card, it said “Please insert original sim-card.”.
I would really appreciate any help to solve my problem.
Thanks James

Yeeehhhhaa! Finally managed to unlock my iphone. Tried many times and failed. Pay attention to the step pointed out in post #10.

Wow, I was gonna hack my phone the day I got it which was right when the price dropped for the first time but I decided against it waiting for the process to be perfected, and wow I can;t imagine it getting any better/easier/faster than this...Thanks

I had a bit of a problem with the unlock procedure, but as others have said you need to use itunes update before quickpwn. {Pay attention to comment Number 10 by Clever. Cheers m8}I also did it without a sim card in and it worked. It will come up with a message saying there is no sim card but just tap the screen and it goes off.
1. Use itunes Version 8 to do the restore, clear any other update out of the itunes folder and let itunes download the file not the ispw from here

  1. Use quickpwn 2.1 and follow it exactly as the tutorial says and it should work for you.

Thanks for all the help guys I now have a 2.1 iphone unlocked and jailbroken. Cheers Kev

this thing is just awesome man . just try it bro .its really good ,i never thought i can do this so easily u know its gr8 , u guys should try it

hi for some reason i dont get the

  1. Customize your firmware
    and
  2. Bootloader Files

window, i have tried every thing, when i start the process i dont get the 7 and 8 it goes straight to #9, what could be the prob, pls help.

hey when i download the bootloaders, i try to open them and it says u can't and windows needs to know what program created them , what do i do?

I've followed the steps up to number 3, BUT QuickPwn wont detect my 2g iPhone. The blue arrow is greyed out.......HELP????
The phone has been updated from 1.1.4 to 2.1 using the custom firmware. Phone now shows the emergency call screen and iTunes says that the sim is not compatible.
I wish I'd never bothered updating - can anyone help????

I just did it, and now get the emergency screen, and I can receive and make calls (in the emergency calls screen) but nothing more. I would like to know one thing... If I restore the phone in iTunes I will get some trouble? Like killing my iPhone?

I was having all sorts of problems with QuickPwn - but managed to do the whole process very easily last night. What I would suggest is to put the phone into DFU restore, open iTunes and restore the firmware to the official 2.1.
Using the above tutorial, start from step 2 and make sure that you follow all the onscreen prompts. Do not disconnect the phone or dislodge the usb cable. Everything should work fine.
If you synced your phone to iTunes, before attempting the QuickPwn process iTunes will popup a dialog offering to "restore data from a backup". You can then restore your contacts, text etc....
Some issues have been found though using this process with phones previously on 1.1.4. See how it goes.............good luck.

Under Settings, General, then Network all that appears is DATA Roaming, VPN, Wi-Fi. Nothing about APN. What is the solution?

Just finished three days of forensic reading, dozens of systematic, scientific efforts, and tonight found this page. No science necessary; Just follow the instructions!! Wow, my phone works, and I am so pleased. Cash to follow.
silver? good advice!!!

Ran this program multiple times. Still saysay "no service.
Can make or recieve calls. Sim card tried in another phone and works great! Help asap???????

For those of you who has the issue with “Please insert original sim-card.” after unlocking with QuickPwn please follow comment #10 first then run QuickPwn again. This includes you guys with AT&T sim cards and pay-as-you-go sims.
I had that problem and this site helped me fix the issue.
1. Had to restore back to factory default of 2.1
2. Put my carrier's sim card in (Tmobile). It could even be a pay-as-you-go sim
3. Ran QuickPwn again
4. Phone works now.

I also got my phone off craigslist and had scoped out this website knowing that i would use it to unlock my phone for t-mobile. I restored it using itunes 8 and followed the procedures but like most of the people before me, got left with the "emergency" calls only screen. I repeated the procedures about 3 times and nothing, so i decided to do the restore again and ran the applications once more and BAM there it was, up and working. For those of you who plan on following this procedure anticipate this happening to you, be patient and restore if you get the emergency message and try again. Worked for me. Thanks for all the info and help!

Thank you so much. I have been seaching for days for an easy to undestand tutorial. Downloaded all files you specified, followed your direction EXACTLY and my first attempt at unlocking and jailbreaking went much more smoothly than I had anticipated! In about 30 minutes (including download time) I was done and using t-mobile, wi-fi worked perfectly and so far everything seems to work perfect! YOU GUYS ROCK!

Worked without any hassles – BTW, though it says all Apple processes and services in the Windows Task Manager should be disabled (or stopped), Apple Mobile Services needs to be ON. The Pwange tool does not recognize without this services ON. I had stopped iPod services as a precaution.
Otherwise, the entire procedure seems to be seamless and thoroughly hassle free.
Actually speaking, the entire process is meant for dumbest of dummies!!!

I have a 2g 2.1 iphone that im trying to unlock for my mom. She has a razor with at&t and i would like to switch the sim from her razor into the iphone. I have tried to unlock it multiple times and i always get the emergency screen everyone else keeps getting. Is there something I could possibley be doing wrong? Do I leave her sim card in there right after i restore the iphone?

I was afraid to upgrade my 1.1.4 firmware to 2.1 because i didn't know if i would be able to unlock the phone. so i tried this process on a buddies, and sure enough it worked perfectly for him. now its my turn. thank you!!!

This is fantastic. I have been stuck with a dead phone for over a week! the secret is to pay attention to comment #10! Thank you!!

works perfectly! im on optus prepaid (australia). i was scared to put my sim in before unlocking the phone, but i did and nothing happened. i just lost all my contacts and msg's etc, but that was expected, being a new phone and all. thankyou soo much! also, remember to follow cmnt #10. i didnt try it without that step first, but it worked for me with using that step, so i would recommend it.

hey whats up!! Im just unlocked my iphone first generation and is worked. I can use my Chilean movistar SIM. originally I get th iphone with a contract on England with O2 company, but I done it and unlock it. Th only matters now is with the phone keyboards..doesnt allow me to dial any number, when I go to trough th screen, this one appears a few second, and then goes to th main screen. I can make phone calls and received them trough my contact list, but th main phone keyboard doesnt work properly...any recommendation?
thanks in advance

Hey, thanks a lot, I had no problems unlocking my 2gen iPhone, I use T mobile and I had no problems like other people here,maybe it got betters. Thanks again!!!

Great!! I tried and it worked a the first try very easy to do with these tutorial thanks!!

my ipone 3g is unlock.and working fine.all the function are also working .but the sim is not yet unlock.its not showing the network....no network is avaiable.in this case what can i do now can any one help me plz.any one there

Is there an unlock for AT&T sim cards for a 1rst Gen iphone running 2.1 firmware? I have a jailbroken phone but evertime i put in a different sim it want me to activate thru i tunes and wants me to upgrade my sim to a data plan. I just want to put a sim card in without adding data and use it as an ipod, iphone, text messages, and wifi. Is this possible and If so is there also a tutorial out there?

HI.. need some help. I had used ZiPhone GUIv2.5 to unlock my i-phone(16GB) but unfortunately i happen to restore with the latest version of i-tunes (ver8) and now I am not able to unlock he phone with the sofware. wonder if anyone can help me on unlocking it..

Hello all,
I'm trying to jailbreak/unlock a iphone 2g with 2.1 firmware already on it using QuickPwn using the steps shown above. However; everytime I get to the activation screen where I have to hold home for 5 seconds and then home+power for 10 seconds and home for 30secs I get the following message:
Your device has connected in the wrong mode. This can be caused by incorrect following of the instructions, or a faulty USB connection.
I've changed USB connections so I know it's not the USB, how do I know what mode I'm in?
I've also followed the procedures in comment #10 where iTunes 8 uploads the most recent firmware 2.1 on the iphone; however nothing happens since I already have 2.1. iTune just prompts if I want to activate with AT&T, at that point I just close iTunes as directed in comment #10.
Also, I can't get out of the "slide for emergency" mode; it's suppose to say "slide to unlock".
Any suggestions would be much appreciated. I've been at this for a few days. If more information is needed please ask and I will respond. I have a AT&T SIM card as well.
Thanks.

im running 2.2 so i hope this works. 2.2 is a real pain in the arse. also to those that dont know you can unlock or jailbreak to your discression but you need to unlock to make calls and you void your warrenty if you screw up... usually those you can just system restore and begin again.

CAN I PUT MY PAY AS YOU GO AT&T SIM CARD IN THE PHONE WHILE USING JAILBREAK AND IT STILL WORK?

Thanks a lot ... it was really easy and very fast... it worked for the 2.2 firmware, the new QuickPwn22-1, it was easy for my iphone 2G. Thanks a lot guys..!!!

Idiotproof..
worked a treat for me from start to finish.
It does wot it says in the tin :D
Cheers..

now that i have unlocked my phone, it does say t-mobile but my phone only lets me make emergency call.
can anyone hepl me

this is what i did i used zi phone and used the option to set my phone up for an update. Then after it was done i used the steps from number 1.

OK guys to those people who are having problems with their sim cards not working. What I did was have my sim card in the phone when i updated to 2.1. Before you start quickpwn make sure everything itunes related is not running then just run quickpwn and follow steps oh and the part that gave me the most trouble was the step where you have to hold the buttons down. You have to wait till it tells you that your phone is in recovery mode, then start holding the buttons down as it prompts you.

i've been doing it for hours and nothing have changed? it keeps telling me to put a sim card to activate it

Hello, my phone will only let me make emergency calls. Can I still jailbreak my iphone 2g (firmware 2.1) using quickpwn if it is in this mode? If not, how do I reset it?
Souwoop, did you get your phone to work? I think we are having the same problem.
Thanks,

i have been trying to unlock the iphone for 24 hours straight. i follow all the directions but it always gets stuck when it takes the phone to recovery mode. it never tells me to go ahead and press home button for 5 seconds or anything like that. i followed comment 10 to a T. i have my sim in there. i must have restored the phone back to factory 20 times already. its driving me crazy. i tried quickpwn and ziphone and everytime the programs take my phone to recover mode everything just sticks. then i go to itunes and restore it myself and start over. argh

na my phone still dont work! wen i do step by step process it gets stuck at step at number 5 selecting the firmware.. it just stays on that step and doesnt change! i neeed seriousss help!!!! PLSS!! THANKS!!!

Hurray, I just got it working!! The trick is to hold the home button for 5 seconds let go of the home button and then select it again while simultaneously holding the power button for 10 seconds, then let go of the power button after 10 seconds but keep holding on to the home button until your phone is jailbroken

do you need a data plan to get the jail break. because i tried to go to installer but it wants to connect to a internet connection, can someone help me. i do not have a data plan. thank you.

Help! I originaly had the I phone 2g now I have the I phone 3g. My dad wants the 2g phone for his t-mobile simcard can I still unlock it even though I had already used the phone with my at&t sim card? Please help!!!!

HELP!.. i tried doing this but when it comes to select the firmware, i clicked browse and i clicked what it says i should click but it did not work..
what do you reckon i should do?
Oh and also i own the iPhone 2g and on the screen of QuickPwn it says;
"The correct IPSW will have a name beginning with iPhone1,12.2 but on your printscreen of QuickPwn it says "iPhone1,12.1"
i really don't know what to do.
Help please,
thanks.

a big big gigantic thank you thank you thank you ....
i've a 2G iPhone which was on 1.1.3, bought from US and carried to Singapore in Mar08.
i used Ziphone to unlock, jailbreak and activate to singapore's local mobile svc provider..and that worked well
just yesterday (29Nov), my itchy fingers "upgraded" the device to OS2.2 thru iTunes8.0.2...as a consequence, my iPhone died on me...i struggled for the entire day and then... windows quickpwn2.2 did the job. i still needed the 3.9 and 4.6 bootloader (at the top of this page)
it worked and now, my iPhone is able to detect my svc provider (it's called, MobileOne) and after struggling for 24 hours...i finally got it to work...
what a relief....
thanks a big big bunch to the dev team.... really appreciate your quickpwn2.2 solution to unlock, jailbreak and activate
God bless u all !!!!

Hi,
I still can't use my T-Zones. I had it working on 2.02, but then restores and upgraded to 2.2. I can't upgrade through Cydia (it shows no internet service; logical, since TZone is not installed). How do I get it to work without Cydia?

Hi!
I'd just like to say thank you so much for your wonderful help. When I found out that my I couldn't use my iPhone because I was on a different network, I was devastated. However, after a week of research, I stumbled across your website and 30 minutes later... here I am!
Happy with my finally unlocked iPhone!
THANK YOU! :):):)

different sim detected, please connect to i tunes,,,, what that means i can not do any thing pls some 1 help me...

Question: I have a 2G iPhone running 2.1 firmware but the phone has not yet been activated. Can I still run this and get it jailbroken/unlocked?

One more thing: will this jailbreak/unlock allow me to run it with t-mobile and still have access to iTunes and the App store?

Awesome - just did it and it finally worked. I think I was having problems with a USB hub and also DFU mode. The key is to count out exactly 10 seconds with the power and home button pressed to get it right + a good USB connection direct to the PC. woo! awesome.

I think I had most problems listed above before I actually got my phone to unlock and jailbreak. Mostly I had the “Please insert original SIM card” message. My phone was not new and had been used with AT&T service. This is everything I had to do before it finally worked. Use ITunes to restore you phone to the factory default 2.1 firmware before you begin. TIP- find a way to do this without the SIM card installed. I say find a way because I had to try multiple plug in sequences before ITunes stopped giving me the message no SIM card installed. I believe this is the only way to remove the record of the AT&T SIM card. Also ITunes will want to install the latest version of firmware 2.2 don’t let it. If you hold down the ‘SHIFT’ key when you press RESTORE in ITunes the software will let you choose what firmware to install. From here follow the procedure as outlined keeping the SIM card slot empty. Once procedure is complete put in your NON AT&T SIM card.

I have a 2nd hand iphone i got off a mate who bought it from the states, 8GB. my problem is the phone was already unlocked and jailbroken, i tried to update it via tunes with ym optus sim in it but now it wont restore the original settings and is just onm the emergency call screen with itunes and a USB in the back ground. so i can't do all the steps above, as it takes me back to the lets set up your iphone page on itunes. i cant set it up cause it always comes up with intunes cannot complete the setup after i agree to the terms and conditions cause im guessing it needs the original sim which i have no idea where that is..
can somebody please help, i just got all my numbers onto this new phone

Went through all the steps; was working perfect. Then i reset settings and files from the settings screen (the one that takes around an hour). Now when I restart it just gets stuck with the apple (pineapple) screen and wont show up in iTunes. Is there anything i can do to fix it or restore it?

my iphone is having issues i had to restore it and now i cant find the firmware or it is just not passing step 6 for some odd reason i need help not smart enough to figure out!
Thanks a lot!

I torrented all the files from the links provided, but when i try to run quickpwn it says "To run this application, you must first install one of the following versions of the .NET Framework: v2.0.50727"
what does this mean? does this method only work on vista? i have a 1st generation iphone on 2.1

I have completed quickpwn and everything seems fine except that I keep getting no service with my new tmoble pay as I go SIM card. My phone is 2G and I just moved to Germany. Does anyone have a suggestion?

I need ur help guys, pls...its not working.. everytime I am trying to open the QuickPwn programm, the window just Debug..Pls guys let me know what can I do?

got a used locked 1g 4gb iphone i want to unlock it to use it with t-mobile. I'm not sure what firmware i have or how to check it. it is in emergency call mode. I'm not able to open the quickpawn program i get the debug screen i need some direction at this point thanks

I have my phone unlocked and working with my T=Mobile Sim card. Everytime I connect to Itunes, it asks if I want to upgrade to 2.1. I'm currently running 1.1.4. If I upgrade, will it re-lock my phone? Thanks

Brilliant!!!!!! I have struggled 2 days with a iphone that my brother brought from the US to South Africa, and it works beautiful!!!!! Thanks!!!!

hey, im have trouble, on the 4th step where i locate the iphone firm ware and open the file that i downloand (iPhone 2.1 ISPW, it does'nt verify it and does not fully load therefore i am unable to continue the process.any suggestions?

It is amazing I actually did it!! It worked!!Took me three attempts. I had to restore to 2.2 in i tunes the 2nd time around, until I found out from a comment above that if you hold down the shift key as you click restore it will allow you to pick the firmware and I got back to 2.1.On my third attempt I used the t mobile sim from the beginning and it worked, I didn't have to remove it at any point! Don't give up guys, trust me, I am not good with computers, I amazed my daughter, it was her phone, she was going to pay to get it done! Thanks sooo much everyone, it didn't take too long once I got the hang of it, and I really feel I have accomplished something now! Happy Holidays to you all!!

this was a great.. it worked beautifully. I wasn't able to make it to work first couple times .. since i was not following the instructions properly .. but this is amazing.
thanks for sharing this.

hi! i have the same problem as everybody does! when i tried to sync my unlocked 2G 2.1 iphone with itunes, i got the phone locked with just an itunes background and the ability to only do an emergency call!(basically i can dial and receive calls but i can;t do anything else. my service is t-mobile) does anybody can help me :(?

same problem as everyone else with the emergency calls only problem with tmobile. Follow step 137 and it will fix this

This worked well. The key was to make sure I restored the 2.1 software WITH my T-mobile card in and then follow the steps. looks like it's working just fine.

Hey All of you guys and Specially Posting # 10 .
Anyone who wants to unlock the iphone please read # 10 Posting.
THANK YOU!!!!!!!!!

btw, to get the simcard out, u can simply use a paperclip. Don't press too hard, but apply certian pressure. Keep trying and it will come out . eventually...

Hey guys sorry for the inconvenience but im trying to jailbrake but my process get stuck on step 4 i dont know why it doesnt load the firmware help any one? thanks...

yo good looks to everyone that posted u helped me big time when i fucked up big time real fast, but onto the next thing. when i updated to 2.2 i lost all my numbers in the process when i restored it back to unlock. is there a way to get those back and is there a way to get my email to work? it keeps telling me that the ssl isn't working correctly. thanks guys and once again THANK YOU BIG FUCKING PROPS TO ALL OF YOU!

One question, how do I activate the iphone w/o an ATT simcard?
Also will pwnage software work without a sim card in it? I tried the home and power key routine and man my hands are tired and can not get into that mode. I'm really not that uncoordinated..please help

Brilliant, I was updating my apps to show off to my family and I thought I had screwed my Iphone on Xmas morning. Got up today, found your site and fixed it. Merry Xmas to me and thanks to you!!!

I have a 1.1.4 firmware iphone (unlocked and jailbroken) that I bought new about 6 months. I want to upgrade the firmware so that I can get some of the new Apple apps.
Do I need to do the full process. I just need to upgrade the firmware!!!

OK...so how do I jailbreak my 1st gen (2G) iPhone now that I've updated to 2.2? The article promises a "How to", but I cannot find such a document. Is it possible to jailbreak my iPhone?

please help!
ma brother just got me an iPhone,im with t-mobile so he had to get it unlocked for me. it was working fine then i guess when i connected it to my computer something went wrong. everything got earased and itunes said i had to restore the phone so i did. when i disconnected it, it told me that my SIM card wasent compatable. i took the SIM card out and put it back in and it did the same thing. i tried resetting it but nothing works.
i know that it's back to the factory settings but i want to unlock it again so i can use it with my t-mobile SIM card. i started to unlock it and it was going well until i got to step 6. where it tells you to browse for firmware. the right bundle is selected but the blue arrow won't pop up so i can go to the next step.
if there's anyone who can help, because i really need it, please do. thanks!

I just finish unlocking my iphone with the program with iPhone1,12.25G77_Restore and I dont have the emergency mode problem anymore

Brilliant. These instructions work perfectly with my 1st gen. I am blown away by how well I am running an iPhone on the T-Mobile network. It's nice to finally have a phone that isn't a piece of shit.

Hi, I did all the stuff needed here, im running 2.1 on my iPhone, i recently downgraded my iPhone from 2.2 to 2.1 and i still cannot unlock it, i did everyhting and now im stuck in emergency mode, i can call people and revieve calls but nothing else, i cant text or anything, please if you know what to do please contact me.

y doesnt my firware gets verified..i updatd to 2.2 from itunes.my phone got locked aftr dat..den i downloaded 2.1 in a folder as stated above..bt wenever i go to verify firmware..da BLUE remains..freezed,,wat do i do now??

It took some doin but it worked... Thanks ..... it helpeed reading all blogs.... it can be done!!!
WAY BETTER THAN (GEVEY 3G) WHICH DONT WORK!!!
Thanks again

The firmware verification step, step 6, is not working for me and I'm not sure why. I tried both the 2.1 and 2.2 IPSW and I still don't get the green check mark. Is there something I'm doing wrong?

I have an iphone 2g. And I have a (regular) ATT Sim card from my old regular phone. I tried to do all steps here and it didn't work. I tried to downgrade to FW 1.1.4 and used ziphone 1.0 and still didn't worked:

  1. No Service
  2. Wifi seemed to have a very weak signal. It only works if i go VERY near my wireless modem. At 5 feet away, i lost the signal. I tried resetting all on General settings and still wont work.

My first question is, would my OLD (non-iphone) ATT Sim could actually work on un unlocked/jailbroken iphone? Is somebody out here actually use an OLD ATT Sim??
Secondly, what is wrong with my wifi signal?
I really appreciate any Help...Thanks Guys!

Hi all,
I will be receiving my new gently used Iphone tomorrow and am excited to jailbreak and unlock it to use with t-mobile. But I am bit confused. I have been researching for the past week on current jail breaking/unlocking procedures, and so far this website is the most thorough and detailed of all of them. But these steps and intructions are on how to to jail break/unlock iphones on 2.1 and other sites are already posting procedures and steps for 2.2 with QuickPwn 2.2
IE - http://www.techbot.net/2008/12/10/step-by-setp-unlock-jailbreak-iphone-f....
Does this mean that this procedure is outdated or does it mean that the experts on this site do not recommend upgrading to and jail breaking/unlocking for 2.2? I ask because these instructions are dated back in early October 7th and quite a bit has occurred since then. Can anybody, or experts, editors of this site, comment on this? As I about to unlock my iphone tomorrow and want to make sure that I am applying the most current, verified, and recommend method out there. Thanks and have great day!

Hi Ethan well you can upgrade to 2.2 if you want but i heard that it may cause serious problems because firmware 2.2 upgrades the baseband so some times it becomes incompatible. So what i would suggest u is to go for 2.1 it has quite the same thing as 2.2.

Hi,
I have read all of the feed back. I have a different problem. Followed all the steps and it worked perfectly as describe, right until the last step on QuickPwn. After following the sequence of buttons an error message comes up in the last second before preparing to jailbreak sayin “Your device has connected in the wrong mode. This can be caused by incorrect following of instructions, or a faulty USB connection. Please try again”.
I have tried numerous times, and differnet IPOD leads and different USB points, does it need to be an IPHONE lead specifically or are they universal. I have followed the steps 100% so I am thinking connection but has anyone heard of this? The leads work fine recognising the phone in I tunes to restore it???
thanks

I am jailbreaking my phone and unlocking it so I can use a T Mobile SIM. At what point during the above process do I put the SIM in?

IphonePro, Thanks for the reply. I researched some more on the actual Iphone-dev team blog and found that upgrading your Iphone first gen/2g is fine and breaking it with QuickPwn 2.2 package is fine. This Baseband issue only occurs when you are trying to unlock 3G. I just jailbreaked and unlocked my iphone2g successfully. Everything is working perfectly without a hitch.

Bart, it doesn't matter. You can leave it or out at the restore. But I would put it in before you initiate QuickPwn. Also, if you plug in your Iphone and get some kind of message stating that "your sim is not supported", and it won't recognize you iphone in itunes, don't worry. Just hold down the power and home button till you get an error message with a triangle warning starting that your iphone needs to go into DFU or recovery mode. Then select ok on the error, hold down shift and select restore and select the firmware you desire for the procedure. After the restore is done, you will still get this error (sim unsupported) but at least you know for sure what firmware you are on. Go ahead and run the QuickPwn utility and follow the directions on the utility. You should be good to go. Good luck!
NOTE: Since you are unlocking your phone to tmobile, I will assume you were like me and not need any old data on the phone. Restoring will erase all old data on the phone. btw - I upgraded to ver 2.2 fine with the below link. It's awesome.
http://www.techbot.net/2008/12/10/step-by-setp-unlock-jailbreak-iphone-f...

can't run QuickPwn.exe, comes back with net framework initilaisation errors (windows).... i'm stuck.

Please see below comment. All hail the great UsMan..:D
jack
December 16th, 2008 at 4:13 am
I downloaded quickpwn now it wont let me open it. it tells me i need to install one of the following versions of the .NET framework: v2.0.50727 it also says to contact my application publisher for instructions about obtaining the appropriate version of th .NET framework. any way can i get some help in laymans terms. I’m really lost.
#
Usman
jack you can download the latest ver of .NET framework from the link below.http://www.filehippo.com/downloaddotnetframework_3/
after installation reboot your windows and when you run quick pwn right click it and click on “Run as Admin”
everything will go fine.

Woo Hoo! It worked!
The first time, I did it, it did not work - I saw the "Different SIM Detected" screen. Then I followed Comment No 10 and it all went fine!

I was frustrated trying to unlock my iPhone with QuickPwn until I tried it without the SIM card in the phone and QuickPwn worked perfectly. That is the exact opposite of what Comment 10 says to do as the first step.

It worked like a charm... the tricky part was to get the right iphone firmware installed... if you do restore on itunes it loads with the latest 2.2 version but for 2.1 I had to download the firmware from another site http://iphone.unlock.no/#restore-firmware-files then did the shift+restore and gave me the option to choose the firmware. After that i followed the procedure as written... the process went very smoothly... Thanks Guys, you rock!!!

I just bought an iPhone 2g currently running on version 2.2 and is NOT Unlocked or Jailbroken... I am a current AT&T customer usding a Palm Treo... When I enter my simcard it only lets me make Emergency calls... Any help?????? I also have Windows XP... I dont see why I would need to Unlock/Jailbreak since I am already a AT&T user, but if any1 can help it would be greatful.....

I HATE MY IPHONE ITS PISSING ME OFF RAWR BLARGHALKHDSF;LAHJSDG;LVHASDF;LKHAS;LFHVG;AJHSBFGJD;LASHGHA;SOUHFD;GOVJAHSBVJNB;LASVN
Ill fix it later :]

hi
i cant hack iphone 2g
I restored and updet with itunse but i can not heck with quickpwn .donot worked

hmmm anyone pls help me..i was stucked with the firmware validation..if u could just help push through that step pls..it was taking too long...

It worked fine, but when I got to Settings, General, and Network, I don't see anything that says APN, just VPN and Wi-Fi. What's going on?

Hi, to whom ever created this cool easy software. I really do appreciate it, Thank you so much, everything worked out just find. Its unlocked (NO JOKE)!! to everyone else reading this just follow this mysterious person's easy instructions and everything reveals and unfolds itself. There is one thing that I need help with though. This had been going on since I had ATT, but when i make calls I can hear the person just find, but they cant hear me, I dont know if its my speaker or anything, please email a my personal email if anyone has an perticular idea as to what steps i can take to resolve this problem. THANK YOU :-)

can anyone accually help i duno whats going on iv sucsessfully unlocked my iphone but i switched it on this morning and its being a dick and wont let me dial any numbers or hang up soo if anyones had the same problem yea say soo and help me out (Y) xx

Lost, I'm having the same problem I can not find APN anywhere only VPN. How can I get data back on the phone with T-Mo SIM?

@iFONE, simply connect your phone to iTunes and after that YouTube should work. If not look for a YouTube fix via Cydia.

Omg Thanxs!!!!
l0l love it so easy and quick
im using vista home basic and
it was so quick and it didnt delete
anything like contacts or pics or music
its tight Thanxssss

Before I try this, I just wanted to know if all my apps, data, pictures, etc. will be deleted? My brother gave me his old iphone so I won't have the same itunes to restore it with.

O my god gys!!!!!!!!! That f.....g iphone. I took my three nights to get the f.....g thing to work. Sorry for the language but i was pretty pissed till 5 min ago. Thanks for that blog it helped me a lot. I was trying to unlock my 2G iphone so i can use it back home in eastern europe.
Everything that is shown on that web site is 100% true.
The onli problem is that the very beginning is not clear- this is when (comment #10) comes in place, but still might be a little confusing
That's why i am going to tell you exactle what i did.
1)i'm using 2G updated on the same computer already at 2.2.1
2) my computer is slow and running xp proffesional :)
3) as (#10 clever) says take your original sim card out, and put the one you want to use after the unlock
4) plug your iphone,open itunes hold the home button down or both of them if it somehow does't work. You need to get it to say that "iPone is connecting in ‘restore mode". The only option you will have is to hit "restore"
After hitting it it gonna say " would you like to restore default settings and update.." where you will say yes but now VERY IMPORTANT- IT THE MIDDLE OF THE PROCESS YOU WILL BE ASKED TO LEAVE YOUR IPHONE PLUGGED IN FOR UPDATING AFTER THE RESTORE IS DONE. DO NOT LET THAT HAPPEN!!!! AFTER THE RESTORE YOUR IPHONE WILL REBOOT AND THIS IS WHEN YOU TURN ITUNES OFF.
That's it after that follow all these steps and you will be fine. Just keep trying.
I know i am probably repeating other comments i just wanted to make it a little more clear.
I hope that helped you and you will never see tha f.....g sign "Different sim detected"
Thanks a lot

hi .. i have a 3G , 8GB Iphone which i purchased from Australia and need to unlock it so i can use it in Singapore . can some please let me know how to go about doing this.

i jailbroke my iphone 2g but wen i put my tmobile sim card it said diffrent sim detected connect 2 itunes then i connect it 2 itunes and it shows sim card not supported how do i fix this problem some one plz help me
email me at mannyfresh906@yahoo.com thanks

My iphone was jailbroken and unlocked and then I upgraded to the latest update from itunes. Once, update was finished, the screen was stuck in the "slide for emergency" connect to iTunes mode. I could receive all texts and calls, and make calls from the emergency keyboard, and the phone recognized my GSM carrier, so I figure it was still unlocked. How do I get my iphone screen back to normal? Help. My phone is a 2g (8gb).

Followed all thesteps trying to unlock my phone.
Went from 2.1 firmware to 2.2.1.
Had the Bootneuter running at its last step.
But i am still unable to UNLOCK my phone. It shows NO SERVICE. But manage to installed cydia n installer.
Under CARRIERS > Network Selection, im able to see my provider. Upon clicking it i get "RESTRICTED NETWORK" "Your selected cellular network is restricted. You can choose a different network in Settings"
Plz help

I installed the Quickpawn software and extracted it, but I can't seem to get it to open up. My computer brings up an error that says it was failed to initialize properly. What could be the case here?

Just want to ask for some links. I upgraded my old 2g iPhone her. 1.1.2 to the new 2.2.1 with the pawnage tool. It's unlocked and jailbroken. I can call and send and recieve text. Tried 3 different sims I have. At& t. Orange and a free generic pay as I go. All worked But. Some things don't work.map can't locate me you tube doesn't work. My bitesms account can't update credits to this phone. And there's probably more. That I haven't tried. So any links or help would be greatly appreciated. Thx ltr mike

worked like a charm! my only stump was Quickpwn wouldn't work properly but I downloaded .net program and it worked!

THANK YOU!! THANK YOU!! I just got my iphone in the mail and it was supposed to be unlocked but of course when I inserted my tmobile sim it said emergency calls only and when I connected to itunes I got the unsupported sim message. I followed your instructions and comment #10 and was unable to unlock it myself. I am the least computer literate person on the planet and I was afraid I would have to send the phone back or pay to have it unlocked. YOU ARE WONDERFUL!!!! If I could do this anyone can!!!

People keep asking how to solve the 'emergency call only' problem. Please read #10, it works. If not the 1st time, keep trying! I had to repeat the whole process twice, but I've read someone else had to do it 4 times. So, a bit frustrating maybe, but it the end it should work!

i downloaded everything and when i use QuickPWN it freezes up and says something is wrong with it i am currently using windows vista is the the problem?

i'm on the 1.1.4 software ..do i have to plug in my iphone to the computer and update it first before i do all of this or should i guess go str8 to the installin ??

THIS WORKED LIKE A CHARM!!! First time around. For T-mobile, just add unlimited internet and your set! The tip earlier about removing the AT&T SIM before beginning the process.....

Having spent all night trying to get this to work, I finally figured it out. I was suffering from the "Wrong Sim / Emergency Only" call screen and it was doing my head in.
So here is exactly what I did.

  1. Insert the new sim card (the one you are wanting to use once unlocked)
  2. Connect the phone to the pc and open itunes.
  3. Once opened press and hold the POWER button and the HOME button until the screen turns off (black). (Your device also disappears from iTunes)
  4. When the screen turns black release the POWER button while still holding the HOME button until your device pops back in iTunes.
    iTunes will then detect your device in recovery mode and ask you to restore it.
  5. Click to restore, it will then ask to restore default setting and update. Again click yes to this.
  6. Allow this to run fully. After roughly 2-3 minutes it will ask you to "leave your iPhone plugged in for updating or rebooting" (can't remember exactly what it said). As soon as it says this close iTunes, but don't touch the iPhone.
  7. Next follow the steps as listed above and hopefully your iPhone will be unlocked.

Well that's how I got it to work for me.
Thanks for the help above, especially # 205 (Fobus666)
Good luck

Comments 10,205,223 ... You are amazing...
Thank You Very Much..... absolutely working..!!

I already performed jailbreak on my iphone, i try to use it with my T-mobile card but it won't let me use it. What can I do? It turns into the emergency call mode only

HI Guys
This thing works. I was worried that it would fail because i used WinXP SP3 but the entire process went smoothly like drinking juice. Congratulation to guys who made this software. Thanks guys

thanks man, this defenitely works, can someone let me know if you can still plug your iphone into itunes without needing it jailbroken again?

Wow these instructions worked perfectly. Very impressed. I'm only 15 and I had no problem with it, not to say that 15 yr olds are stupid.. ANYWHO!.. great stuff. Thanx

after downloading the QuickPwn zip files, I tried to unzip it. But when I click on the pineapple, it prompts error application.
Anyone can help?
Pls advise. Thanks

Hey i have a problem well its about my sim card and i have tmobile and its asking me about "different sim detected" so i you can please help me!!!!

does this fully unlock the iphone.. where i can use my US carrier and then if i go out of the country like asia i can just pop in an asian sim card without having to redo all of this? if anyone can answer that question i would appreciate it.

i got the same problem as #223 person do. it say tmobile on the top and stuff but only saying emg call. i cant access nothing esle

Well i just found the problem. YOU MUST LEAVE YOUR SIM CARD IN THE PHONE WHILE YOU DOING ALL THOSE STEPS AND STUFF. BEFORE YOU LIKE STOP USING QUICKPWN MAKE SURE YOUR SIMCARD IS IN THE PHONE I JUST FIGURE IT OUT

JARRR!!! #10 was the key for me to getting my AT&T iPhone unlocked onto T-Mobile prepay. This actually had a disabled AT&T SIM at first because I upgraded to the 3G 6 months ago. I had the different SIM problem at first until I found comment #10. I had to use my AT&T SIM to connect to iTunes and initiate a Restore, but IMPORTANT: I closed iTunes while the iPhone was rebooting after the restore (before it could activate via AT&T), put in my T-Mobile SIM and then ran QuickPwn selecting only the unlock option. When it was done and phone finally rebooted, it was up and running on T-Mobile! Yes! Thanks everyone! Now I'm ready for iPhone OS 3.0...

... and even though I had to do a full restore (wipe out all my info and media), after I successfully unlocked, I was able to restore from the previous backup (even though it was from when I had AT&T and associated with a different phone #) and get all my stuff back. It just takes a while...

Just wanted to say thank you very much !!
Works like a dream !!
Friend did update his unlocked phone to 2.2.1 and was sim-locked again. But after following these instructions his iphone works again and is sim-lock free. Big "A+" for your help.

thank you vary much. It realy rocks.
As Comment #10 says: The crutial part is the iPhone firmware must never have been activated via iTunes in the first place otherwise it will always fail when you change SIM cards.

HI, I HAVE A 2G IPHONE I FOLLOW ALL THE PROCESS TO UNLOCKED THE IPHONE, IT READS T-MOBIL AND ATT SIMCARD BUT STILL SAYS EMERGENCY CALLS ONLY. I CAN`T GET ACCESS TO FULL MENU (ICON APPICATIONS ) please hep

absolutely amazing guys done mine on 24/03/2009 as i borrowed a freinds iphone and basically f****d it up but with your help ive sorted it just hope he doesnt notice the home screen change!!!!

hi guys,
all is working just fine, thank you very much,
but under Settings, General, then Network all that appears is DATA Roaming, VPN, Wi-Fi.
Nothing about APN. What is the solution?
i did see others here with the same problem,
but no solutions :(
anyone can help me?
hugs

Pages